How to Reset Ring Camera – Simple Guide

You probably don’t need to know how to reset the ring camera very often, but it is great to know that you have that option. If you have a problem with your device, or it has been misplaced, the ability to reset it can be an effective solution. You probably won’t need to reset your camera very often, but there are times when this can come in handy.

If you have lost your Ring camera or its battery has drained so much that it won’t even turn on, it may be time to reset the device. This process is extremely simple and straightforward and only takes a few moments. 

This article will help you get started with the process of resetting your Ring camera as well as some troubleshooting tips if something goes wrong.

How to Reset Ring Camera – Step by Step

The first step to resetting your camera is finding it. If it has been misplaced or you have lost it, you will first want to retrace your steps to find it. Sometimes, the battery dies or the camera gets misplaced and it can be difficult to find again. 

If you can’t find it, or you have had it stolen, you can easily reset the camera to its factory settings by following these steps: Find the reset button on the bottom of the device. Press and hold the button for about 10 seconds. You will see a red LED light flash a few times, then go off. The camera is now reset.

How to Completely Reset Your Ring Security Camera

If you have tried to reset your Ring security camera without success, it may be time to perform a full reset. This will erase all of the data from the device and return it to factory settings. This can be helpful if you have experienced some sort of error and have tried everything else, or if you have lost the device and need to reset it to find it. 

The process for performing a full reset on your Ring camera is as follows: Find the reset button on the bottom of the device. Press and hold the button for about 10 seconds. You will see a red LED light flash a few times, then go off. You have now performed a full reset on your Ring camera.

Why Would You Want to Reset Ring Camera?

There are a few reasons you might want to reset Ring camera. If you have lost the device and you want to reset it to find it again, you may want to reset it to factory settings. If you have changed the device’s Wi-Fi network, you may have issues getting the device to connect with your network again. 

Resetting the device will clear out any network settings that are stored on the device and allow you to connect it to your network again. You can also clear the device’s data, such as recordings and logs, if you want to start fresh with the device. If you have changed your Wi-Fi network and you want to connect the camera to your new network, you can reset the camera to factory settings and then reconfigure it to work with your new network instead of the old one.

The Process of Resetting a Ring Camera

If you have lost the device and you want to reset the camera, you will first want to find the reset button. On the bottom of the camera is a small reset button. You will want to press and hold this button for about 10 seconds. When you press the button, you will see a red LED light flash a few times. 

When the light goes off, you will have successfully reset the camera to factory settings. If you want to clear the device’s data, such as recordings and logs, you will want to open the Ring app and navigate to the device settings for your camera. Select “Clear Logs” and then “Clear Recording History” to start with a clean slate again.

What to Do If The Reset Doesn’t Work?

If you try to reset your visible Ring security camera and it doesn’t work, you will want to try resetting the device again. Press and hold the reset button for 10 seconds again. If this still doesn’t work, try holding the button for 30 seconds. If this still doesn’t work, you may want to try resetting the device with the power off. 

You will want to unplug the camera from the wall or the outlet and leave it unplugged for about 30 seconds. Plug it back in again and press the reset button. If this still doesn’t work, the camera may be broken and you will need to contact Ring for help.

Tips: Reset Your Ring Camera

Resetting your Ring camera will return the device to factory settings. If you have changed any settings or have altered the device in any way, you will need to configure it again after resetting it. 

• If you are resetting your device to find it or reconnect it to your network, you may want to wait until the camera is unplugged to reset it. This will avoid resetting the camera while it is plugged in and online, which could cause problems. 
• If you are resetting your camera to clear the device’s data, you can do this while the device is plugged in.

FAQ : How to Reset Ring Camera?

How to Reset Ring Camera From App?

If you’re like most people, you probably don’t think about resetting your Ring camera very often. But if you’ve forgotten your password or just want to start fresh, it’s actually pretty easy to do from the app.

Here’s a quick guide on how to reset your Ring camera from the app:

1. Open the Ring app and tap on the “Devices” tab.
2. Select the camera you want to reset.
3. Tap on the gear icon in the top right corner.
4. Scroll down and tap on “Reset Camera.”
5. Enter your password when prompted and tap on “Reset Camera” again.

And that’s it! Once you’ve reset your Ring camera, you’ll be able to set it up again just like new.

How to Reset Ring Floodlight Camera?

If you’re having trouble with your Ring Floodlight Camera, you may need to reset it.

Here’s how:

1. go to the Ring app and tap on the menu icon in the top left corner.
2. select “Devices” from the menu.
3. find your Ring Floodlight Camera in the list of devices and tap on it.
4. tap on the “Settings” cog in the top right corner of the screen.
5. scroll down to the bottom of the screen and tap on “Remove Device.”
6. confirm that you want to remove the device by tapping on “Remove.”
7. once the device has been removed, tap on the “Add Device” button in the top right corner of the screen.
8. select “Floodlight” from the list of devices.
9. follow the instructions on the screen to set up your Ring Floodlight Camera.

How to Reset Ring Camera Without Pressing Button?

If you’re like me, you’ve probably wondered how to reset your Ring camera without pressing the button. Perhaps you’ve tried pressing the button, but it doesn’t seem to do anything. Or maybe you just don’t want to risk damaging your camera. Whatever the reason, there is a way to reset your Ring camera without pressing the button.

Here’s what you need to do:

1. First, find a small paperclip or similar object that can fit into the reset hole on the back of your Ring camera.
2. Gently insert the paperclip (or other object) into the reset hole and hold it in place for 10 seconds.
3. After 10 seconds, remove the paperclip (or other object) from the reset hole.
4. Your Ring camera should now be reset and ready to use!

Final Words

How to Reset a Ring security Camera is a question that many people have. The answer is simple, and it can be done in just a few steps. First, find the reset button on the back of your camera. Next, press and hold the reset button for 30 seconds. The Specialty of Ring security cameras record in the dark.

Finally, release the reset button and your camera will reset itself. That’s all there is to it! So if you ever find yourself in need of how to reset ring camera, now you know how to do it.